No Lens Attached: Sony E-Mount
... 5R, NEX-5T, NEX-6, NEX-7 a3000, Menu -> Setup -> Release w/o Lens -> Enable a3500, Menu -> Shooting Settings -> Release w/o Lens -> Enable a5000, a5100, ...
... 5R, NEX-5T, NEX-6, NEX-7 a3000, Menu -> Setup -> Release w/o Lens -> Enable a3500, Menu -> Shooting Settings -> Release w/o Lens -> Enable a5000, a5100, ...
... manual. When in any other mode the camera tries to take control of the lens which is not possible as the adapter does not have any contact with the camera circuitry, so you get the lens check warning as the camera does not think there is a lens attached.
The camera needs to be set to function without a FX-Mount lens attached. You can do this by changing the following camera setting: X-A1, X-A2, X-A3, X-A5, X-A10, X-A20, ...
‘Lens Not Found’ – Warning Message Appears For Panasonic Lumix: The camera needs to be set to function without a MFT-Mount lens attached. You can do this by changing the following camera setting: ‘Menu’ -> ‘Custom Menu 5’ -> ...
The camera needs to be set to function without a EF-M Mount lens attached. If you do not have access to your physical manual and cannot find one online, you can refer to the guide below: EOS M, EOS M2: 1) In the ...
The camera needs to be set to function without a EF-M Mount lens attached. If you do not have access to your physical manual and cannot find one online, you can refer to the guide below: EOS M, EOS M2: 1) In the ...
‘No lens.’ – Warning Message Appears The adapter is designed to trigger a sensor inside the camera body itself so no setting needs to be changed. If the error message is coming up with one of our adapters attached, then it is possible that the adapter is not ...
For Konica Minolta and “No Lens Attached” Custom Menu 3 First item “Shutter Lock” Set it to “Off: no lens” (Depending on camera model “Shutter Lock” May be in different menu location)